How to carry out inspection and treatment for softened water treatment equipment that does not absorb salt? The key function of softened water treatment equipment is to reduce water hardness, avoid the formation of dirt, thereby reducing energy consumption of the heating furnace and reasonably preventing safety risks. How should maintenance be carried out when the softened water treatment equipment does not absorb salt? If the softened water treatment equipment fails to absorb salt during long-term operation, it is necessary to conduct inspections from the following aspects:

1. The working pressure of water supply and drainage is too low.

2. The pipeline of the salt water filtration device is blocked.

3. The salt suction pipeline is blocked.

4. Blockage of water jet, etc.

The maintenance and inspection of softened water treatment equipment should be installed in a certain order, which is as follows:

1. Check the air pressure gauge at the water inlet to determine if the seepage working pressure meets the basic specifications.

2. Check if there is any blockage in the salt suction pipe and the sewage pump.

3. Twist open the salt water filtration device of the softened water treatment equipment and clean it with cold water after disassembly. If the problem is still not solved, then everyone must remove the lock cover on the upper end of the water jet and clean it clean. According to the above process, the problem of non salt absorption in softened water treatment equipment can be basically solved.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题