The water treatment process of antifreeze production equipment: Due to the presence of various microorganisms in tap water or well water, directly using it to produce antifreeze will produce various microorganisms over time, which will affect the quality and shelf life of antifreeze. So, we need to first treat the quality, and the water treatment standard required for producing antifreeze is industrial water standard (three-level water treatment equipment). This equipment selectively penetrates certain components in the solution under external pressure, thereby achieving the purpose of desalination, purification, or concentration separation, which is a practical technology. High removal rate, soluble salts above 97%, organic matter above 98%, colloid above 98%, effluent conductivity less than 10 μ S/cm. Widely used in the production of deionized water for various industries such as chemical, daily chemical, electronics, electroplating, food and beverage, and pharmaceuticals. The hourly water treatment capacity is 1000L/hour.

Of course, reverse osmosis pure water equipment (according to the daily chemical industry water standard) can also be used for water quality purification, which is of higher quality and can be chosen by customers themselves.

The production process of antifreeze production equipment: This is an important part of antifreeze production, mainly using a dedicated stirring reaction kettle for antifreeze. The equipment adopts a single-layer structure, and the main body is made of 304 stainless steel material. The internal surface of the equipment is sanitary grade mirror polished; Hygiene without dead corners, easy to clean. The outer surface of the head is mirror polished, and the cylinder body is matte in its original color; The structure adopts a closed design, with the lower ellipse connected to the R angle of the cylinder body by spinning, and is smooth without any sanitary dead corners. The stirring speed is between 30-60 revolutions per minute. Equipped with explosion-proof motor drive, high production efficiency.

The packaging process of antifreeze production equipment: The produced antifreeze cannot be sold without good packaging. The antifreeze products produced through the production process need to be divided into 1.5L or 2L plastic bottles using a liquid filling machine. Due to the tendency of bubbles during the antifreeze filling process, the liquid filling machine we often configure requires a device that can effectively prevent bubbles. Our equipment adopts a flow metering method, which is accurate. The filling volume and filling speed can be freely adjusted within the value range, with foot switch and automatic filling function conversion, high accuracy, and convenient operation. The cylinder body and hopper are both made of 316L stainless steel material, and the piston is made of polytetrafluoroethylene material. The filling head adopts a submersible design, deep into the bottom of the bottle, effectively preventing liquid bubbles and splashing. The filling head design includes double headed, four headed, and eight headed, which can be freely selected according to the production volume. Widely used in the filling of liquid and fluid materials in industries such as pesticides, washing, and daily chemical products.

In addition to liquid filling machines, we can also add capping machines, labeling machines, inkjet printers, heat shrink machines, etc. to the packaging process. These devices belong to post filling equipment and can be completed manually or by machines. But in order to improve production efficiency and accept labor costs, it is generally recommended to use machines to complete. Customers can freely configure according to their needs.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题