(1) Punch holes or fix ultrapure water equipment in the selected location. The hole should be smooth, with accurate depth and spacing. The hole circumference should not have cracks, notches, or burrs.

(2) Connect to the water pipe. First, close the main water valve and connect the ultra pure water equipment. The interface should be wrapped with adhesive tape and not leak water.

(3) Connect the concentrated water discharge outlet. The pure water machine can directly place the sewage pipe into the sewage pipe, leaving a certain space at the end to prevent sewage from flowing back into the drinking water equipment and prevent the phenomenon of "siphoning" at the sewage outlet; If the sewage pipe of the drinking water equipment is directly placed into the sewage pipe, a ball valve should be installed at the end of the sewage pipe, which can be opened irregularly to play a drainage role; The sewage pipe can also be directly connected to the original tap. The sewage pipe and the sewage outlet of the drinking water equipment must be properly connected and cannot leak water.

(4) Connect the purified water outlet to the purified faucet. If the flow rate is greater than 500 liters, 4 branch pipes and universal faucets can be directly used; If the flow rate is less than 500 liters, you can choose to use a 4-to-2 connector to connect to the purified water outlet, and connect to the 2-to-2 faucet through a 2-to-2 white PE pipe. When connecting two pipes, first cut the pipe end flat, then put on the nut, and then insert the pipe plug into the PE pipe, tighten it, and insert the PE pipe about 1cm beyond the nut into the joint and tighten it.

(5) Installation of faucet: If you want to install the faucet on the sink, a stainless steel sink can be opened with a hole opener. If you want to fix the faucet on the wall, you can use a right angle faucet hanging piece to fix the faucet on the wall. The joint connection method is the same as (4), and the fixed part should be tightened without any shaking.

(6) Open the main inlet ball valve, debug the water purifier (refer to maintenance and upkeep for debugging steps), observe whether the joint is leaking, and observe for at least 2 hours. Place a clean dry towel under the water purifier to check for water leakage.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题