Water treatment equipment is becoming increasingly common in our daily lives. Below, we will show you the common problems of carbon replacement and cleaning. Let's take a look together.

1. Before replacing the sand and charcoal in the water treatment equipment, it is necessary to completely cover the electrical components near the sand tank and charcoal tank with waterproof materials such as plastic, to prevent water from entering the pump and causing the pump to burn out.

2. When filling sand and carbon in water treatment equipment, the management center pipe should be sealed with raw tape to prevent sand and carbon from entering the middle pipe.

3. When cleaning sand and carbon in water treatment equipment, it is necessary to first wash it before backwashing. During backwashing, pay attention to checking the air pressure gauge. If the working pressure exceeds 3kg during backwashing, it should be immediately flushed.

4. The filling volume of sand and charcoal should not exceed 70% of the total volume to facilitate indoor space for backwashing.

5. Generally, the raw water pump needs to be opened for cleaning. The working pressure of drinking water cannot be cleaned thoroughly, unless the working pressure of the source water is very high.

专业水处理的疑难问题，产品选型问题，可以单击下面的微信二维码电话联系贺工在线指导，长按微信二维码可自动识别添加贺工微信沟通解决您的疑难问题